manualshive.com logo in svg

Centurion ROAD BIKE ISO 4210-2, Руководство пользователя, Страница: 74 / 96

Поделиться
Скачать
Centurion ROAD BIKE ISO 4210-2 Скачать руководство пользователя страница 74

74

a

b

c

d

Puncture kit

The most important accessories for a successful 

cycle tour are a tire pump and a small tool kit. The 

tool kit should include two plastic tire levers, the most 

commonly used Allen keys, a spare tube, a tire repair 

kit, your mobile phone, if necessary, and a little cash 

(a)

. You will be better prepared in case of a puncture.

Cycle computers

There are electronic computers that show your cur-

rent and average speed, your daily and annual mile-

age as well as the duration of the present ride 

(b)

. 

Real de luxe models also give the highest speed 

achieved, differences in elevation, your cadence or 

your heart rate.

Today, there are global positioning systems (GPS) 

and specific power meters for optimal training on the 

market which are compatible with your CENTURION 

road bike.

Aero or triathlon/time trial bars

Before you mount aero or triathlon/time trial bars 

(c) 

on your CENTURION road bike, it is essential to find 

out first whether the handlebars or a corresponding 

attachment for use with your handlebars and stem 

are approved.

i 

Read the operating instructions of the 

handlebar and stem manufacturers on 

this CENTURION CD-ROM. If you are in 

doubt or if you have any questions, contact your 

CENTURION dealer!

Fenders/mudguards

If you want to mount mudguards on your CENTURION 

road bike, ask your CENTURION dealer for advice. 

There are removable mudguards 

(d)

, also referred 

to as clip-on mudguards, as well as firmly attached 

models that provide more protection.

Retrofittable fenders for a fix fastening are usually 

made of plastics and are secured in the correct po-

sition by means of additional stays. The length of the 

stay is perfect when the bottom edge of the fender 

runs at an approx. distance of 15 mm in parallel to 

the tire.

For safety reasons the front wheel stays must have 

security fastenings. They prevent the tire from being 

blocked by impurities taken up by the front wheel 

from the ground. In this case the security fastening 

frees the stay and hereby prevents a possible acci-

dent. The plug connection can easily be refastened.

G 

Damaged fenders should be replaced in 

any case. Risk of an accident!

Содержание ROAD BIKE ISO 4210-2

































































































Отзывы:

Нет отзывов