background image

14.

 

Store the unit after it has completely cooled. 

15.

 

Use extension cords that are suitable for high draw equipment 

16.

 

Always unplug the unit and turn it off when not in use to prolong 
element life and for safety purposes. 

17.

 

Follow the instructions and do not try to modify repair the machine.   

18.

 

The oven does get very hot do not touch it or place flammable material 
on top or around it.  

19.

 

Store the device in a safe dry place away from children, and exposure 
to harmful elements. 

Disclaimer: 

 

Centroform and its associated parties shall not be liable for any bodily or property damages of 
any kind resulting from the purchase or proper/ improper use of the product including incidental, 
special, consequential damages, sums paid by buyer to third parties, or loss of anticipated profits 
or benefits.  Any kind of damages or liabilities are the responsibility of the end user.  Centroform 
or its affiliates make no express or implied warranty of any kind including but not limited to the 
compliance of the product with the requirements of any law, rule, and specification of any kind.

 

www.centroform.com 

 

Содержание EZFORM SV 1217








Отзывы: