5.1
5.2
5.3
Connect two vertical (V) 1531mm assembly rails at 90º to
each end of the 1500mm horizontal rail (H2) ensuring that the
graphic fixing strip is outermost and the verticals are flush with
the end of the 1500mm rail. Bottom horizontal 1500mm rail (H2)
should have an adjustable thumbscrew foot in the middle of a
260mm connector bar. Connect middle vertical rail (V1- with
twin graphic fixing strips) to centre of the assembled horizontal
(H2) using the expanding clamp. Tighten 3 bottom grub screws
in expanding clamps on verticals to secure to horizontal.