14
Additionally, users can change the network property of the camera to DHCP or
Static IP directly in the device finding list. Refer to the following section for
changing the camera
’s network property.
Example of Changing IP Camera
’s Network Property- Static IP to DHCP
Step 1:
In the finding device list, click on the camera which its network property
is going to be changed. On the selected item, right click and select
<Network Setup>. Meanwhile, record the MAC address of the camera,
for future identification.
Step 2:
The <Network Setup> page will come out. Select <DHCP>, and click
on <Apply> button down the page.
Step 3:
Click on <OK> on the Note of setting change. Wait for one minute to
re-search the camera.
Step 4:
Click on the <Device Search> button to re-search all the devices.
Then double click on the camera with the correct MAC address.
Step 5:
The login window will come out. Enter username and password to
access the camera.
Installing DC Viewer Software Online
For the initial access to the camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the camera.
If the web browser doesn
’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
Internet Security Settings
) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control
…> to allow
the installation. Then the security warning window will pop up. Click on <Install>
to carry on software installation.
