Page 3
For technical questions, please call 1-888-866-5797.
Item 62381
NOTICE
Clean the Spray Gun IMMEDIATELY after EVERY use.
Delayed or inadequate cleaning will permanently clog the Spray Gun.
Latex paint hardens quickly and permanently inside Spray Gun.
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
personal Safety
a.
Stay alert. Watch what you are doing and
use common sense when operating the tool.
Do not use the tool while tired or under the
influence of drugs, alcohol, or medication.
A moment of inattention while operating the
tool increases the risk of injury to persons.
b.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair increases
the risk of injury to persons as a result
of being caught in moving parts.
c.
Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
d.
Use safety equipment.
Wear protective paint spraying
gloves and a NIOSH-approved
respirator during use. Non-skid safety
shoes and a hard hat must be used
for the applicable conditions.
e.
Always wear eye protection.
Wear ANSI-approved safety goggles.
Tool Use and Care
a.
Do not force the tool.
Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
b.
Disconnect the tool from the air source
before making any adjustments, changing
accessories, or storing the tool.
Such preventive
safety measures reduce the risk of starting the tool
unintentionally. Turn off and detach the air supply,
safely discharge any residual air pressure, and
release the throttle and/or turn the switch to
its off position before leaving the work area.
c.
Store the tool when it is idle out of reach
of children and other untrained persons.
A tool is dangerous in the hands of untrained users.
d.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that affects the tool’s
operation.
If damaged, have the tool serviced
before using. Many accidents are caused
by poorly maintained tools. There is a risk
of bursting if the tool is damaged.
e.
Use only accessories that are identified by the
manufacturer for the specific tool model.
Use of
an accessory not intended for use with the specific
tool model, increases the risk of injury to persons.
Service
a.
Tool service must be performed only
by qualified repair personnel.
b.
When servicing a tool, use only identical
replacement parts. Use only authorized parts.
c.
Use only lubricants supplied with the
tool or specified by the manufacturer.
