PA168X IAX2 Phone User Manual (V1.42)
Beijing Centrality Communication Inc
7
left side of the base.
2.
Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the
Ethernet Jack. Plug the other end of the cable into HUB switch.
3.
Power on IP phone: p
lug the power cord adapter into the Power Jack. Then
plug the other end of the power cord adapter into the appropriate wall
outlet.
¾
Configuration
Three ways of configuring the PA168X IAX2 phone are available: phone
keypad, web browser, Telnet commands.
¾
Phone Keypad setup
●
Function Keys Introduction: When using keypad and LCD to configure
the settings of IP phone, following keys will be used:
Keys
Function
Keys
Function
Menu/Enter
Enter the menu and
confirm.
Set
Becomes to modify the appearance.
Backspace
Delete and back
upper menu.
Vol+
Turn over menu backward.
Keypads
Modify values
Vol -
Turn over menu forward.
Refer to above operation; you can reach any menu to modify any value.
Please refer to following structure illustrations to learn the values of each
menu item. As for the meaning of each item and value, please refer to
Web
Browser Setting
chapter.