Centralion MaxPower 1000 Скачать руководство пользователя страница 3

Safety – CAUTION! 

 

z

  This product is specially designed for PCs and it is not recommended 

for use in any life-supporting system and other specific important 
equipment. 

z

  This equipment can be operated by any individual with no previous 

training. 

z

  Do not plug household appliances such as hair dryers to UPS 

receptacles.

 

z

  This unit intended for installation in a controlled environment 

(temperature controlled, indoor area free of conductive contaminants). 
Avoid installing the UPS in locations where there is standing or 
running water, or excessive humidity.

 

z

  CAUTION: Risk of electric shock, do not remove cover. No user 

serviceable parts inside. Refer servicing to qualified service 
personnel. 

z

  The utility power outlet shall be near the equipment and easily 

accessible. To isolate UPS from AC input, remove the plug from the 
utility power outlet.

 

z

  If UPS is to be stored for a long time, it is recommended to recharge 

the batteries (by connecting the utility power to UPS, switch “ON”), 
once a month for 24 hours to avoid a full battery discharge. 

z

  Please do not use the UPS in excess of the rated load capacity. 

z

  The UPS contains one/two large-capacity batteries. So the shell shall 

not be opened, otherwise such dangers as electric shock will be 
caused. If any internal overhaul or replacement of the battery is 
required, please contact the distributor. 

z

  The internal short circuiting of the UPS will lead to dangers such as 

electric shock or fire, therefore, no water containers (such as a water 
glass) shall be placed on the top of the UPS so as to avoid such 
dangers as electric shock. 

z

  Do not dispose of battery or batteries in a fire.  The battery may 

explode. 

z

  Do not open or mutilate the battery or batteries.  Released 

electrolyte is harmful to the skin and eyes.    It may be toxic. 

z

 

Φ

  on the rating label stands for phase symbol. 

z

  A battery can present a risk of electrical shock and high short circuit 

current. The following precautions should be observed when working 
on batteries : 

1)  Remove watches, rings, or other metal objects from the hand. 
2)  Use tools with insulated handles. 

Содержание MaxPower 1000










Отзывы: