Central Pneumatic Professional 97007 Скачать руководство пользователя страница 3

Page 3

SKU 97007

For technical questions, please call 1-800-444-3353.

SaVe tHiS Manual

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

Safety alert Symbol and Signal 

Words

in this manual, on the labeling, 

and all other information 

provided with this product:

  this is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

dangeR indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

WaRning 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

caution, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

notice is used to 

address practices 

not related to personal injury.
 

caution, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

iMpoRtant SaFety 

inStRuctionS

inStRuctionS peRtaining 

to a RiSk oF FiRe, 

electRic SHock, oR 

injuRy to peRSonS

WaRning

 – When using tools, basic pre-

cautions should always be followed, 

including the following:

general

a. 

to reduce the risks of electric 

shock, fire, and injury to persons, 

read all the instructions before us-

ing the tool.

Work area

a. 

keep the work area clean and well 

lighted. 

Cluttered benches and dark 

areas increase the risks of electric 

shock, fire, and injury to persons.

b. 

do not operate the tool in explo-

sive atmospheres, such as in the 

presence of flammable liquids, 

gases, or dust. 

The tool is able to 

create sparks resulting in the ignition 

of the dust or fumes.

c. 

Keep bystanders, children, and 

visitors away while operating the 

dangeR

WaRning

caution

Notice

caution

Содержание Professional 97007
















Отзывы: