SKU 95141
For technical questions, please call 1-800-444-3353.
Page 9
12. When finished, release the Trigger
(27) to stop the Impact Wrench.
13. Turn off the air compressor. Squeeze
the Trigger (27) of the Impact Wrench
to release any remaining air pres-
sure in the system and tool. Discon-
nect the tool from its air supply hose.
Then, remove the socket from the
tool and store the socket in a safe
location.
(See Figure C.)
14. Make sure to store the Impact
Wrench in a clean, dry, safe location
out of reach of children and other
unauthorized people.
INSPECTION, MAINTENANCE,
AND CLEANING
1.
WARNING! Always wear ANSI
approved safety impact goggles
when performing any inspection,
maintenance, or cleaning proce-
dures.
2.
WARNING!
Prior to performing any
inspection, maintenance, or cleaning
of the Impact Wrench, make sure to
disconnect the air hose from the tool.
Then, squeeze the Trigger (27) again
to release any compressed air in the
system and tool.
3.
To clean the exterior of the Impact
Wrench,
wipe with a clean, damp
cloth using a mild detergent or mild
solvent. Do not immerse the tool in
liquids.
4.
When storing,
always store the Riv-
eter in a clean, dry, safe location out
of reach of children.
5.
CAUTION!
All maintenance, service,
and repairs not mentioned in this
manual must only be performed by a
qualified service technician.
