Page 3
SKU 94803
For technical questions, please call 1-800-444-3353
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over
or across running machines or air hoses.
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by an authorized technician. The
handles must be kept clean, dry, and free from oil and grease at all times.
10.
Disconnect air supply
. Disconnect air hose when not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.
12.
Avoid unintentional starting
. Be sure the trigger is released when not in use and
before plugging in. Do not carry any tool with your finger on the trigger, whether it is
plugged in or not.
13.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not turn On and Off properly.
15.
Guard against electric shock
. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
16.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
17.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Wrench.
18.
Use proper size and type extension cord
. If an extension cord is required, it
must be of the proper size and type to supply the correct current to the compressor
without heating up. Otherwise, the extension cord could melt and catch fire, or cause
electrical damage to the compressor. Check your air compressor’s manual for the
appropriate size cord.
19.
Maintenance
. For your safety, maintenance should be performed regularly by a
qualified technician.
20.
Compressed air only
.
Use clean, dry regulated, compressed air at 90 PSI. Never
use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power
source for this tool.
