SKU 93742
For technical questions, please call 1-800-444-3353.
Page 3
and nonskid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
7.
Use eye and ear protection
. Always wear ANSI approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood chips.
Wear an ANSI approved dust mask or respirator when working around metal,
wood, and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9.
Maintain tools with care
. Keep tools clean and in good condition for better and
safer performance. Follow instructions for lubricating and changing accessories.
Inspect tool fittings and hoses periodically and, if damaged, have them repaired
by an authorized technician. The tool must be kept clean, dry, and free from oil
and grease at all times.
10.
Disconnect Air Hose before maintenance
. Never service the Sander, clear
jams, or disassemble with the air hose attached. Disconnect the Sander when
not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before connecting
it.
12.
Avoid unintentional starting
. Be sure the valve lever is in the Off position
when not in use and before attaching to pressure source.
13.
Stay alert
. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician. Do not use the tool if the trigger does not
operate properly.
15.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
16.
Compressed air only
. Never use combustible gas as a power source.
17.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
