SKU 93656
Page 2
For technical questions, please call 1-800-444-3353.
Specifications
Pin Size
23 Gauge,
1
/
2
” to 1” long, Headless pins
Magazine Capacity 100
Operating PSI
60-100 PSI
Air Inlet Size
1
/
4
” NPT Male
Safety Feature
Single Sequential Safety Trip Mechanism
Accessories
Two Hex Wrenches, Lubricating Oil,
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean
. Cluttered areas invite injuries.
2.
Observe work area conditions
. Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4.
Store idle equipment
. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job
. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which
it was intended. Do not modify this tool and do not use this tool for a purpose for
which it was not intended.
6.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over
or across running machines or air hoses.
8.
Stay within air pressure capacity
.
Never operate the Nailer above 90 PSI.
REV 07i
