SKU 93566
For technical questions please call 1-800-444-3353.
Page 6
Maintenance (Cont’d)
4.
Weekly, or more often if used on a daily basis, use a grease gun (not included), to inject
grease into the Grease Fitting. Put in only a drop or two. See
FIGURE 3
.
5.
If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that
the Air Inlet (10) is facing up. Squeeze the Trigger (4), and place one or two drops
of oil into the Air Inlet (10). Squeezing the Trigger (4) allows the oil to circulate in the
motor.
Air Regulator (12)
Air Inlet (10)
Trigger (4)
Anvil (18)
Figure 1
Figure 2
The Air Regulator (12) has an index from 1 to 4.
Push and turn the Air Regulator (12) to a higher
number, 3 or 4, for more air flow and more power.
Push and turn it to a lower number, 2 or 1, for less
power.
4
3
2
Forward
Reverse
Grease Fitting
Figure 3
1
F
R
