Page 4
SKU 90114
21.
Pacemaker safety warning. People with pacemakers should consult with their
physician(s) before using this product; operation of equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.
22.
Use tools with both hands when required. Many tools such as chain saws, drills,
routers, and this High Speed Cutter, require the use of both hands when operating.
This helps maintain tool stability and keeps hands away from the working area of the
tool.
23.
Compressed air only. Never use combustible gases as a power source.
24.
3” Cutting Disc. Only use a standard 3” cutting disc (rated at 20,000 RPM or greater)
with this Air High Speed Cutter. Never use any other type of disc, blade or cutter on
this air tool.
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Unpacking
Operation
For best service you should incorporate an oiler, regulator, and inline filter, as shown in the
diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor
Freight Tools.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities, contain chemicals known [to the State of California] to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
-
Lead from lead-based paints
-
Crystalline silica from bricks and cement or other masonry products
-
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5,
et seq. )
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Cutter
1/4” - 18 NPT
