manualshive.com logo in svg

Central Pneumatic 66872, Руководство по эксплуатации, Страница: 12 / 16

Поделиться
Скачать
Central Pneumatic 66872 Скачать руководство пользователя страница 12

SKU 66872 

For technical questions, please call 1-800-444-3353. 

Page 12

• Wear ANSI-approved safety 

goggles with side shields.  

Other people in the work area 

must also wear ANSI-approved 

impact safety goggles.

• Release the trigger.

• Detach the air supply.

• Attempt to fire the Tool into 

a piece of scrap wood to 

ensure that it is disconnected 

and is incapable of firing any 

fasteners.

• The Magazine is spring-

loaded and may cause parts 

or a fastener to fly out of the 

Tool.  Empty the magazine 

and leave it open during 

service.  
TO PREVENT SERIOUS 

INJURY FROM TOOL 

FAILURE: 

Do not use damaged 

equipment.  If abnormal noise, 

vibration, or leaking air leaks 

occur, have the problem 

corrected before further use.
TO PREVENT EXPLOSION:  

Lubricate only with specified 

lubricants.  Lubricate the air 

inlet using only pneumatic 

tool oil.  Lubricate the internal 

mechanism using only white 

lithium grease.  Other 

lubricants may damage the 

mechanism and may be highly 

flammable, causing an 

explosion.

Cleaning, Maintenance, and 

Lubrication

Note:

  These procedures are in addition to 

the regular checks and maintenance 

explained as part of the regular op-

eration of the air-operated tool.

1. 

Daily - Air Supply Maintenance: 

Every day, perform maintenance on 

the air supply according to the com-

ponent manufacturers’ instructions.   

The lubricator’s oil level needs to be 

maintained and the moisture filter 

must be regularly drained.   Perform-

ing routine maintenance on the air 

supply will allow the tool to operate 

more safely and will also reduce wear 

on the tool.

Clearing Jams

 

TO PREVENT 

SERIOUS INJURY 

FROM ACCIDENTAL 

OPERATION, BEFORE ANY 

MAINTENANCE OR REPAIRS 

ARE DONE (including clearing 

jams):

• Wear ANSI-approved safety 

goggles with side shields.  

Other people in the work area 

must also wear ANSI-approved 

impact safety goggles.

• Release the trigger.

• Detach the air supply.

• Attempt to fire Tool into piece 

of scrap wood to ensure 

that it is disconnected and 

incapable of firing fasteners.

• Empty the magazine and leave 

it open during service.  The 

Magazine is spring-loaded 

and may cause parts or a 

fastener to fly out of the Tool.

1.  If a fastener is jammed in the dis-

charge area, remove it with pliers.

2.  If a fastener is jammed in the maga-

zine, pull the Pusher all the way 

Содержание 66872

















Отзывы:

Нет отзывов