For technical questions, please call 1-800-444-3353;
troubleshooting section near the end of manual.
SKU 66801
Page 7
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from chemi
-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5,
et seq.
)
WARNING: The brass components
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5,
et seq.
)
Attach all accessories properly to the
10.
tool before connecting the air sup-
ply. A loose accessory may detach or
break during operation.
Obey the manual for the air compres-
11.
sor used to power this tool.
Install an in-line shutoff valve to allow
12.
immediate control over the air supply
in an emergency, even if a hose is
ruptured.
note
Performance of the compressor (if
powered by line voltage) may vary
depending on variations in local line
voltage. Extension cord usage may
also affect tool performance.
saVe tHese
InstructIOns.