Page 2
SKU 47868
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended .
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Always wear steel toe shoes when operating the Air Chisel.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles and
ear protection. Wear a full face shield when breaking up concrete.
Blows per minute
3000
Shank opening
3/4”
Air Hose Size
3/8”
Air Inlet
1/4”- 18 NPT Female
Required Air Pressure
90 PSI
Dimensions
6-7/8” L x 2” W x 6-1/2” H
Average Air Consumption 4 CFM
Tool Weight
3.4 Lbs.
Chisels included: Cut Chisel, Removal Tool, Weld Buster,
Tapered Punch, Ripping Chisel, Bushing Splitter,
Weld Rivet Cutter, Panel Cutter, Long Blade Cutter
Specifications
07g
