Central Pneumatic 37730, Руководство по сборке и эксплуатации

Страница: 4 / 8

SKU 37730 Page 4
15. Guard against electric shock when working on electrical equipment,
such as your air compressor. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
16. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
17. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
18. Use proper size and type air pressure line and fittings. The recommended
air line for this tool is 3/8” delivering no more than 90 psi. Recommended air
inlet size is 1/4” - 18 npt.
19. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
20. You should maintain a proper regulator and moisture trap in your air
line at all times.
Note: Performance of this tool may vary depending on variations in local air pressure.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
WARNING: The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code 25249.5,
et seq. )
Unpacking
When unpacking, Examine the conditiojn of your impact wrench. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Air Impact
Wrench