Page 3
SKU 93217
3.
Keep children away
. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4.
Store idle equipment
. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job
. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which these tools
were designed. They will do the job better and more safely at the rate for which they
were intended. Do not modify these tools and do not use these tools for a purpose for
which they were not intended.
6.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye and ear protection
. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are producing metal filings, or flying chips of wood,
concrete, metal or any other material. Wear an ANSI approved dust mask or respirator
when working around metal, wood, and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over
or across running machines or air hoses.
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by an authorized technician. The
handles must be kept clean, dry, and free from oil and grease at all times.
10.
Disconnect air supply
. Disconnect air hose when not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before connecting the tool.
12.
Avoid unintentional starting
. Be sure the trigger is released when not in use and
before connecting to the air source. Do not carry any tool with your finger on the
trigger, whether it is connected or not.
13.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if the trigger does not operate properly.
15.
Guard against electric shock
. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
16.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with these tools. Approved accessories are available from Harbor
Freight Tools.
