SKU 06852
For technical questions, please call 1-800-444-3353.
PAGE 3
5.
USE EYE, BREAThING, AND hAND PROTECTION.
Wear ANSI approved safe-
ty impact eyeglasses, safety impact full face shield, and a dust mask or respirator
when using this product. ANSI approved safety impact eyeglasses, safety impact
full face shield, dust masks and respirators are available from Harbor Freight
Tools.
6.
DRESS SAFELY.
Do not wear loose clothing or jewelry, as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
7.
DO NOT OVERREACh.
Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
8.
INDUSTRIAL APPLICATIONS MUST FOLLOW OShA REQUIREMENTS.
9.
STAY ALERT.
Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.
10.
ChECK FOR DAMAGED PARTS.
Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect the operation of this product. Re-
place or repair damaged or worn parts immediately.
11.
REPLACEMENT PARTS AND ACCESSORIES:
When servicing, use only identi-
cal replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
12.
MAINTAIN ThIS PRODUCT WITh CARE.
Keep this product clean and dry for
better and safer performance.
13.
MAINTENANCE:
For your safety, service and maintenance should be performed
regularly by a qualified technician.
14.
USE ThE RIGhT TOOL FOR ThE JOB.
Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain applica-
tions for which this tool was designed. It will do the job better and more safely
at the rate for which it was intended. Do not modify this tool, and do not use this
tool for a purpose for which it was not intended.
15.
WARNING:
The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors, which cannot be
built into this product, but must be supplied by the operator.
