Page 10
For technical questions, please call 1-800-444-3353.
SKU 67595
Figure For Step 1-3
2a
7a
7a
3a
3. Attach the two Horizontal Braces (7A)
inside the flanges on the Front and Rear
Panels (3A, 2A).
9a
1a
13a
8a
Figure For Step 1-4
4. Attach the Motor Plate Bracket (9A)
to the front of the Mounting Plate (1A)
with the raised section of it towards the
center. The Motor Plate Bracket (9A)
should be near the Switch Cover (13A)
as shown above.
Attach the Brace (8A) under the Mount-
ing Plate (1A) toward the rear as shown
above (Figure 1-4).
h
k
o
q
required hardware
letter
description
qty
(for this phase)
H
M8 Washer
4
K
M8 Nut
4
O
Foot Assembly
4
Q
Foot Bracket
4
Figure For Step 1-5
3a
q
theSe holeS
MuSt line up.
5. Press a Foot Bracket (Q) over each
corner of the Front and Rear Panels (3A,
2A). One of the holes in the Bracket
should line up with the hole in the corner
of the Panel as shown.
Figure For Step 1-6
3a
q
o
6. Insert a Foot Assembly (O) through each
Foot Bracket (Q) and Panel (3A, 2A).
Secure with Washer (H) and Nut (K).