Specifications
Wheel Balancer includes: Base, Balancer, and Leadscrew
Overall Dimensions: 22-5/8" x 11-7/8" x 11-7/8"
Base Diameter: 11-7/8"; Center Rod diameter: .813"
Hub Diameter: 1.495"; Tool Weight: 13.40 Lbs.
Designed for use: Light Truck and Automobile Wheels
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and in-
voice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNI
NG: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Do not use the Wheel Balancer until properly trained.
This product is intended for use
by properly trained and experienced personnel only. If you are not familiar with the proper
and safe operation of a wheel balancer, do not use until trained.
2.
Keep work area clean
. Cluttered areas invite injuries.
3.
Observe work area conditions
. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically pow-
ered tools in the presence of flammable gases or liquids.
4.
Keep children away
. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
5.
Store idle equipment
. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
6.
Do not force tool
. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
7.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
8.
Use eye and ear protection
. Always wear ANSI approved impact safety goggles. Wear
a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved
dust mask or respirator when working around metal, wood, and chemical dusts and mists.
#39741
For technical questions, please call 1-800-444-3353.
Page 2