31810
For technical questions, please call 1-888-866-5797.
Page 9
INSPECTION, MAINTENANCE,
AND CLEANING
WARNING!
Always make sure the
Power Switch is in its “OFF” position,
and unplug the Power Cord/Plug
from its 120 volt electrical outlet
before performing any inspection,
adjustments, maintenance, or
cleaning.
1.
Before each use, inspect the general
condition of the Tool. Check for loose
screws, misalignment or binding of
moving parts, cracked or broken
parts, damaged electrical wiring, and
any other condition that may affect
its safe operation. If abnormal noise
or vibration occurs, have the problem
corrected before further use.
Do not use damaged equipment.
2.
Daily:
With a soft brush, cloth, or
vacuum, remove all dust and debris
from the exterior of the Tool.
3.
CAUTION!
All maintenance,
service, or repairs not listed in this
manual are only to be attempted by a
qualified service technician.
