Page 12
SKU 98178
for technical questions, please call 1-800-444-3353.
uSer-MAinTenAnce
inSTrucTionS
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
To prevenT
SeriouS injury
froM AccidenTAl
operATion:
Turn off the tool, detach the
air supply, safely discharge
any residual air pressure in
the tool, and release the
throttle and/or turn the switch
to its off position before
performing any inspection,
maintenance, or cleaning
procedures.
To prevenT SeriouS
injury froM Tool
fAilure:
do not use damaged
equipment. if abnormal
noise, vibration, or leaking
air occurs, have the problem
corrected before further use.
To prevenT exploSion:
lubricate the tool only
with specified lubricants.
lubricate the air inlet using
only pneumatic tool oil.
other lubricants may damage
the mechanism and may be
highly flammable, causing an
explosion.
cleaning, Maintenance, and
lubrication
note:
These procedures are in addition to
the regular checks and maintenance
explained as part of the regular op-
eration of the air-operated tool.
daily - Air Supply Maintenance:
1.
Every day, perform maintenance on
the air supply according to the com-
ponent manufacturers’ instructions.
The lubricator’s oil level needs to be
maintained and the moisture filter
must be regularly drained. Perform-
ing routine maintenance on the air
supply will allow the tool to operate
more safely and will also reduce wear
on the tool.
Weekly - pivot point lubrication
2.
and Safety inspection:
Lubricate the pivot points of the tool,
using white lithium grease. Inspect for
loose fasteners or any damage to the
Lift. Repair immediately or mark “Out
of Service” until repairs are made.
If the jack becomes fails to lift you
3.
may need to add oil to the cylender,
