SKU 94835
For technical questions please call 1-800-444-3353
Page 9
maintenance
1. Periodically check to be sure the Roller Guides are properly adjusted to the
track or rail on which the jack is mounted. Check to be sure the stops (not
included) at the ends of the rails are secure and in good condition. Check to
be sure the rails are secure, stable, parallel and level. Check to be sure the
Bolts m10x25 (25) are secure.
2. Periodically check the air and hydraulic fittings and Hydraulic Hose (33) for
leaks. Repair if any leak is detected.
3. Periodically lubricate all moving points of the Rolling Jack, including, but not
limited to Adjustable Arms (4), Roller Axle (), Lower Axle (14), Flat Washer
(1), Roller Guide (19), Slider Shaft (22), Scissor Assembly Axle (30), and
Sleeve Bushings (34).
4. The piston of the Hydraulic Ram (12) should be kept clean, free of dirt and
water, and protected from corrosion.
troubleshooting
1. If the jack fails to lift, or fades under load, check the air connection, hydraulic
connectors and Hydraulic Hose (33) for leaks.
2. If no leaks are detected, have a qualified service person inspect the Foot
Pedal / Hydraulic Pump Assembly (26) and Hydraulic Ram (12) for faults.
