4.
Then press down Pedal (37) to apply
pressure. Please note: There is no
high/low settings for Pump. Once the
Pedal is pressed, pressure is applied
at a constant setting. Press on
Release Bar (43) to release pressure.
5.
To prevent accidents, turn off the tool,
shut the Air Valve (12), and detach
the air supply, and safely discharge
any residual air pressure in the tool
after use. Clean external surfaces
of the tool with clean, dry cloth, and
apply a thin coat of tool oil. Then
store the tool indoors out of children’s
reach.
USER-MAINTENANCE
INSTRUCTIONS
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn off the tool, detach the
air supply, safely discharge
any residual air pressure in
the tool, and release the
throttle and/or turn the switch
to its off position before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal
noise, vibration, or leaking
air occurs, have the problem
corrected before further use.
TO PREVENT EXPLOSION:
Lubricate the tool only
with specified lubricants.
Lubricate the air inlet using
only pneumatic tool oil. Other
lubricants may damage the
mechanism and may be
highly flammable, causing an
explosion.
Page 9
Item 58047
For technical questions, please call 1-888-866-5797.
