SKU 94428 & 94429
For technical questions please call 1-800-444-3353.
Page 4
Fixed Base (1)
Figure 1
OPERATING INSTRUCTIONS
Turn the Handle (6) counterclockwise to open the Jaws (3) of the Vise. Place the
workpiece you are working on inside the Jaws. Tighten Jaws (3) against the work-
piece by turning the Handle (6) clockwise until your workpiece is held securely
against the Jaws (3).
Caution:
Damage could occur to your workpiece if you over-
tighten the Handle (6).
See Figure 2.
To remove the object you are working on, turn the Handle (6) counterclockwise two
to three times, opening the Jaws (3). Remove your workpiece.
1.
2.
Mounting
Holes (Qty.3)
Figure 2
Handle (6)
Fixed
Base (1)
Jaw (3)
Jaw (3)
Anvil
Swivel
Base (5)
Locking
T-Handle (4)
