CentoLight Scenic W504, Руководство пользователя

Страница: 12 / 32

12 12
SCENIC W504 User Manual
Eng
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
6 - M
enu
o
PeraTion
By pressing MENU button, the display will cycle through 12 different menus. Press
ENTER button to enter the corresponding menu, press UP or DOWN to modify cur-
rent parameter value. Then, press ENTER button again to save current value.
No. Menu Function
1 d---
DMX512 address code setting: 001-512. When there is an incoming DMX signal, the
lower right corner indicator lights up
2 r---
Pure White 1 brightness adjustment: 0-255
3 G---
Warm White 1 brightness adjustment: 0-255
4 b---
Pure White 2 brightness adjustment: 0-255
5 n---
Warm White 2 brightness adjustment: 0-255
6 F---
Stroboscopic/speed adjustment:
0 = N/C
1-84 = lightning strobo
85-169 = random strobo
170-255 = standard stroboscopic
7
Pr--
(Internal
Preset)
PR01 Pure White 1
PR02 Warm White 1
PR03 Pure White 2
PR04 Warm White 2
PR05 Pure White 1 + Warm White 1
PR06 Pure White 1 + Pure White 2 PR07 Warm White 1 + Warm White 2
PR08 All LED Bright
PR09 Jump Effect
PR10 Fading Effect
PR11 Strobe Effect
PR12 Combined Effects
8 SP--
Built-in program speed setting: SP01-16
9 AU--
Auto/Audi: Auto/Voice control
10
FAN-
(*)
FAN0: Fan works only when LED temperature is above 40°C
FAN1: Silent mode
FAN2: Fan always working
11 dp-- dp0/1: 30s instant blackout and light on
12 CH--
CH6/CH2 Model selection
(*)
Read “6.3. Fan Noise & LED Temperature Control” on page 13 for further details.