CentoLight 321879, Руководство пользователя

Страница: 12 / 40

1 2 1 2
SQUARE 200PZ User Manual
Eng
Signal amplifier is a must to connect more fixtures.
5.5.
3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect this fixture to a 5-Pin XLR in-
put fixture, you need to use an adapter-cable or make it by yourself. Below you can
see the wiring correspondence between 3-Pin and 5-Pin plug and socket standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
6 - P
rofile
u
se
6.1.
Beam Shape, Zoom and Focus Adjusting
1
2
Focus
Zoom
After fixing or hanging the fixture, having connected Power In/Out and DMX In/Out
cables,
1. Draw out the 4 beam-adjustment flakes.
2. Power on the unit and loosen the zoom and focus adjustment nuts.
3. Adjust the zoom first from 15° to 36°, then the focus by moving respectively on
the focusing and zooming slots.