IR WEATHER-PROOF CAMERA
MANUAL
9. Power cable or video cable should be always loose.
Do not keep the cables tight or twisted.
10. Do not leave the unit along with an unstable stand or table.
11. Please use the camera unit within given temperature and electricity limit.
12. Please make sure that installation should be done by qualified service
person only.
13. Do not disassemble the unit by yourself. When there is problem with
the unit please contact after-sale service center or the shop where
you bought.
1. Make a hole of Ø25mm in diameter for passing cable.
2. Drill four holes on the wall or ceiling and insert the anchors.
3. Arrange the cables and fix the screws.
ACCESSORIES
DIMENSION
4. Attach the sunvisor and fix the sunvisor fixing bolt.
5. Loosen the bolt A, C-1 and C-2 by using the 3mm wrench included.
6. Face the direction of the camera to monitor.
7. Tighen the bolt A, B, C-1, C-2 to complete adjustment.
1. Attach the bracket to the camera's bottom hole tightly.(In case of
installing the camera on the ceiling, attach the bracket to the
sunvisor fixing bolt hole on top of the camera.)
2. Fix the camera and bracket on the wall or ceiling.
1. New generation, new technology Gen
DSP adopted.
Ⅱ
2. This camera is incredibly flexible to install with its 3-axis camera
construction, which makes the camera ceiling, wall or slope
mountable.
3. This product is weather-proof to resist rain, snow and other weather
factors(IP66).
4. 40M range visible in total darkness with 40pcs of IR LEDs.(Indoor)
5. Adopted DNR technology, It reduces noise efficiently in low light condition.
6. Supreme Resolution(600 TV-Line)
7. Day & Night function
8. Support 8 different privacy zone
9. Provide Max. 10x digital zoom
10. DIS(Digital Image stabilizer) relieves any picture tremble due to external
factor such as wind.
11. LWDR(Low frame Wide Dynamic Range) & DWDR(Digital Wide Dynamic
Range)
12. Dynamic IR : When IR LED is turned on in B/W, the objects can be
clearly identified due to the function that decreases screen saturation
of objects within a short distance.
13. Multi function : High Light Mask, Lens Shading Compensation, Motion
Detection
14. Multi-language full OSD support
1. Please study the instruction manual before your applications and
keep it for your future reference.
2. Do not flash LED light directly on the eyes when LEDs are on.
3. Do not install the camera on a unstable surface.
It will cause falling or other hazards.
4. Do not use improper power, it could cause fire or electric shock.
(Use the AC adaptor 12V DC regulated, 1A)
5. Do not disassemble or re-model the camera, it could cause fire,
electric shock or other hazards.
6. Stop using the camera when you find a malfunction like smoke or
unusual heat, it could cause fire or electric shock.
7. Due to the possibility of water leakage, do not cut or peel off the
cable. In case you cut or peel off the cable, the warranty will be void.
8. Do not adhere dangerous articles to the camera.
CAUTION
FEATURE
HOW TO INSTALL(Built-in bracket type)
HOW TO INSTALL(Stand bracket type - Option)
SCREW, 3EA
WRENCH
BOLT A
BOLT C-2
BOLT C-1
BOLT B
BOLT
SUNVISOR
Ø6
Ø25
ANCHOR 6x30, 4EA
SCREW Tp1 4x35, 4EA
ANCHOR 6x30, 4EA
SCREW 4x35 TP1 PAN SUS, 4EA
WRENCH 3mm L TYPE, 1EA
SUNVISOR BOLT, 1EA
Extra video output cable for installation
,
1EA(option)
101.7
206.7
80.4
72
