42009084-015 AB
Introduction
The programmer controls your central heating system.
It will enable you to select the times when heating and
hot water are switched
ON
and
OFF
.
Features
•
Weekday/weekend heating programme.
•
Weekday/weekend hot water programme.
•
Three
ON/OFF
switching times per day.
•
Built-in programme with typical
ON/OFF
times.
•
ADVANCE
buttons for heating and hot water.
•
BOOST
buttons for heating and hot water, giving
up to 3 hours of boost.
•
Settings stored in non-volatile memory to prevent
loss of programme during power cuts.
•
12 hour am/pm or 24 hour clock format.
The programmer and other controls in your
central heating system will provide comfortable
temperatures in your home when you want them.
12 hour am/pm or 24 hour clock display
Your programmer can operate on 12 hour am/pm or
24 hour clock formats. To change the format, ensure
the slider is in the
Run Programme
position then press
the
+
and
-
buttons together for about 3 seconds. All
the displayed times will be automatically changed to
the new format.
Repeating this procedure will change the clock display
back to the original format.
Weekday/Weekend Programming
When setting the programme times (slider is in
Set
Heating
or
Set Hot Water
positions) the applicable
days will be displayed as a block of days (Mon...Fri or
Sat...Sun). The
Day
button will switch between the
Weekday and Weekend programmes when pressed.
Operating Your Controller
Normal Operation
For normal operation the slider must be in the
Run
Programme
position.
A red indicator lamp shows when the heating or hot
water is switched
ON
.
Two
Mode
buttons are provided to select how the
heating and hot water are controlled.
Keep pressing the
Heating
Mode
button to scroll
through the 4 possible modes:
Off -
The heating will remain
OFF
.
Auto -
The heating will be switched
ON
and
OFF
automatically according to the heating programme.
Once -
The heating will come
ON
at the first
programmed
ON
time and go
OFF
at the last
programmed
OFF
time.
Cont. -
The heating will remain
ON
continuously.
The
Hot Water Mode
button operates in the same
manner as described above for the
Heating Mode
button.
Boost
The
BOOST
buttons switch the heating or hot water
ON
for up to 3 hours without altering the programme.
Pressing either button once will give one hour boost,
and the words
H1 HR
or
HOT WATER +1 HR
show on the display to confirm the button has been
pressed.
When the red indicator lamp is
OFF
, pressing the
BOOST
button switches the heating or hot water
ON
for just one hour.
When the red indicator lamp is
ON
, pressing the
BOOST
button extends the programmed
ON
period
by one hour.
Further presses of the
BOOST
buttons will increase
the boost period by one hour for each button press,
up to a maximum of 3 hours. The display will change
to show the number of hours of boost, for example
H3 HR
or
HOT WATER +2 HR
.
To cancel the boost hours, keep pressing the
BOOST
button until the
H (1, 2 or 3) HR
or
HOT
WATER + (1,2 or 3) HR
disappears from the display.
Advance
The
ADVANCE
buttons switch the heating or hot
water
ON
or
OFF
without altering the programme.
When the indicator lamp is
ON
, pressing the
ADVANCE
button switches the heating or hot water
OFF
until the
next programmed
ON
time.
When the indicator lamp is
OFF
, pressing the
ADVANCE
button switches the heating or hot water
ON
until the next programmed
OFF
time.
Power Failure
Your programmer stores the programme in non-volatile
memory to ensure correct operation after a mains
supply power cut. Date/time/mode are saved regularly
so you may only need to correct the time after a power
cut of more than a few minutes. Follow the instructions
for “Setting the Correct Date/Time” overpage.
User Guide
for 340006 (EHE0200363) Programmer
Ref: 4277
Whilst every care has been taken to ensure that the information included in
this document was accurate at the time of printing, we reserve the right to
change specifications at any time.
The photographs reproduced in this publication are within the constraints of
the printing process and are NOT to be used for matching purposes. E&OE.
Wolseley UK, The Wolseley Center, Harrison Way, Spa Park,
Royal Leamington Spa, CV31 3HH
For further information telephone 0344 292 7062
WEEE Directive 2012/19/EU
At the end of the product life dispose
of the packaging and product in a
corresponding recycling centre. Do
not dispose of the unit with the usual
domestic refuse. Do not burn the product.
