DATA LOGGER SOUND LEVEL METER
When you have Sound Level DATA LOGGER meter connected to PC and
select "DataLogger" from main menu or click from tool bar to load
recoreded data from the meter and there will be a progress indicator to show
the loading progress. if error occurs, just click "DataLogger" again.
After the data was loaded, the left hand side will show how many data
sets were loaded and detail information for each data set (start data, start time,
recording rate and record numbers).
for examples:
It will transfer first data set to graph and tabular on the right hand side every
time after you load recorded data from the Sound Level Meter and you can click
at any data set to change the set for graph.
On the right hand side is the waveform graph and statistic of the data set
you choose. In reference to graph.
▪
Tutorial - Quick Start to Use SE322 TestLink
(1.) Recording real time data in waveform.
1.Power on the Sound Level Meter first and connect it to a PC RS-232
serial port wit the cable(SE-300)
2.Start SE322 program.
www.SpectoTechnology.com
Specto Technology
y
1061 E. Elizabeth Ave. Linden, NJ 07036
y
866-925-7737
y
info@spectotechnology
13
