Data Logger
Instruction Manual
3
IV. Operation Instructions:
4.1 Power-Up
Press the power button to turn the thermometer ON or OFF.
When the user power it on, the LCD will show how much memory
space is available to use.
For example:
It indicates that there are 16,000 records memory space available.
4.2 Connection the Thermocouples
For measurement, plug the thermocouple into the input connectors.
4.3 Selecting the Temperature Scale
When the meter was first power on, the default scale setting is set at Celsius (°C) scale. The user
may change it to Fahrenheit (°F) by pressing “
°C/°F
” button and vice versa to Celsius. Next time
you power on, the scale setting will be the same as which when you powerd off last time.
4.4 Data-Hold Operation
The user may hold the present reading and keep it on the display by pressing the “
HOLD
” button.
When the held data is no longer needed, one may release the data-hold operation by pressing
“
HOLD
” button again.
When the meter is under Data Hold operation, the
“
△
REL”, "max min"
and “
°C/°F
”
button are
disabled. (when you press "
△
REL
” ,
“ °C/°F ”
and
"max min"
button in HOLD mode, there will be
two continuous beeps)
To exit the MAX/MIN mode, one may press and hold "MAX MIN" button for two seconds.
4.5 DataLogger:
When one press the "REC" button, the meter will start recording,
press the "REC" button again will stop recording, If you want to
clear the memory, power off the meter, then press and hold “REC”
button and then press power button and hold at least 2 seconds,
then release all buttons ,then LCD will show "CLR" to clear the
memory.
4.6 Clock Setup :
1: press and hold “MAX MIN” button and then power on the meter:
2: press “
△
REL
”(clock):
3: press "REC"
▲
or "
°C/°F"
▼
to increase or decrease number,
press “
△
REL
”(clock) to adjust next item. The adjusting order is
year
→
month
→
day
→
hour
→
minute, then press “
△
REL
” (clock)
to finish adjusting. If you want abort during a setup process, press
power button to cancel.
