Center 262, Инструкция по эксплуатации, Страница: 12 / 20

Clamp Meter
8
6.2 DCA measurement:
With the clamp disconnected from
any conductor, switch the function
selector to range.
Press "
ZERO " button to enter the
zero reading.
Open the clamp by pressing the
jaw-opening handle and insert the
cable to be
measured into the jaw. Close the
clamp and get the reading from
the LCD panel.
Note:
Before this measurement, disconnect any test lead from the meter
for safety.
In some cases where reading is difficult, press the "
HOLD " button
and read the result later.
6-3 ACV Measurement
：
WARNING!
Maximum Input Voltage is 300V AC/DC. Do not attempt to
Take any voltage measurement that may exceed this
maximum to avoid Electrical shock hazard and/or damage to
this instrument.
Switch the main function selector
to range.
Connect red test lead to
“
+
”
terminal and black one to the
“
COM
”
terminal.
Measure the voltage by touch the
test lead tips to the test circuit
where the value of voltage is
needed.
Read the result from the LCD
panel.