background image

Page 2

For technical questions, please call 1-800-444-3353.

Item 60601 

        

Specifications

Input

Voltage

12 VDC Nominal  

(11-15 VDC)

Wire Gauge

5 AWG (up to 6 ft.)

3 AWG (up to 10 ft.)

Internal Fuses

30 A x 6

Input Fuse Rating

180 A

Output

Continuous

1500

Surge

3000

Receptacles

2 AC outlets, 

2 USB ports

Waveform

Modified Sine Wave

Voltage Range

120 ±12 V~

Frequency

60 ±1 Hz

Ground Wire Gauge

8 AWG

No Load Current  

(Switch on)

2 A

Maximum efficiency

90%

Full load efficiency

85%

Over voltage Shutdown

15 ±0.5 V

Low voltage alarm

10.5 ±0.3 V

Low voltage shutdown

10 ±0.5 V

Thermal Shutdown

149 ±9 °F

Note:

  Battery charge level, wire length and 

other factors will effect performance.

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Содержание 60601













Отзывы: