CEN-TECH CEN-TECH 98982 Скачать руководство пользователя страница 3

Page 3

SKU 98982

For technical questions, please call 1-800-444-3353.

ranges and refrigerators.  

There is 

an increased risk of electric shock if 

your body is grounded.

do not expose the Scale to rain or 

c. 

wet conditions.  

Water entering the 

Scale will increase the risk of electric 

shock.

do not abuse the Power Cord 

d. 

(17).  never use the Cord for car-

rying, pulling or unplugging the 

Cord.  Keep the Cord away from 

heat, oil, sharp edges or moving 

parts.  

Damaged or entangled Cords 

increase the risk of electric shock.

When operating the Scale out-

e. 

doors, use an extension cord suit-

able for outdoor use.  

Use of a cord 

suitable for outdoor use reduces the 

risk of electric shock.

If operating the Scale in a damp 

f. 

location is unavoidable, use a 

Ground Fault Circuit Interrupter 

(GFCI) protected supply. 

Use of 

a GFCI reduces the risk of electric 

shock.

Personal safety

3. 

Stay alert, watch what you are do-

a. 

ing and use common sense when 

operating the Scale.  do not use 

the Scale while you are tired or un-

der the influence of drugs, alcohol 

or medication.

  A moment of inatten-

tion while operating the Scale may 

result in serious personal injury.

use safety equipment.  Always 

b. 

wear eye protection.

  Safety equip-

ment such as ANSI-approved safety 

impact goggles will reduce personal 

injuries.

Prevent unintentional starting. 

c. 

Ensure the Power Switch (15) is 

in the off-position before connect-

ing to power source and/or bat-

tery pack, picking up or carrying 

the tool.

  Carrying battery operated 

equipment with your finger on the 

Power Switch or energizing equip-

ment that have the Power Switch on 

invites accidents.

do not overreach.  Keep proper 

d. 

footing and balance at all times.

  

This enables better control of the 

Scale in unexpected situations.

Scale use and care

4. 

do not force the Scale.  use the 

a. 

correct Scale for your application.

  

The correct Scale will do the job bet

-

ter and safer at the rate for which it 

was designed.

do not use the Scale if the Power 

b. 

Switch (15) does not turn it on and 

off.  

Any equipment that cannot be 

controlled with the Power Switch is 

dangerous and must be repaired.

unplug the Power Cord (17) before 

c. 

making any adjustments, changing 

accessories, or storing the Scale.  

Such preventive safety measures 

reduce the risk of starting the equip-

ment accidentally.

Store idle equipment out of the 

d. 

reach of children and do not allow 

persons unfamiliar with the Scale 

or these instructions to oper-

ate the equipment.  

Line powered 

and battery powered equipment are 

dangerous in the hands of untrained 

users.

Maintain the Scale.  Check for 

e. 

misalignment or binding of mov-

ing parts, breakage of parts and 

any other condition that may affect 

the Scale’s operation.  If damaged, 

have the Scale repaired before 

Содержание CEN-TECH 98982














Отзывы: