Page
SKU 97245
For technical questions, please call 1-800-444-3353.
SpeciFicationS
Battery Requirements
Standard 9VDC “radio” battery
Sensitivity
Adjustable using rotary switch
Display
Audible warning
Power Switch
Push/Release Button
Feature
Bright White LED Spotlight
Operating Temperature
-15° to 129° F
Relative Humidity less than 80%
unpacKing
When unpacking, make sure item is intact and undamaged. If parts are missing
or broken, call Harbor Freight Tools at the number shown on the cover of this manual.
list of contents
description
Q’ty
Hand Held Metal Detector
1
9VDC Battery
1
Carrying Case
1
Set up inStructionS
read the entire iMportant SaFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
Battery installation
This item is shipped with the battery installed.
To replace battery, slide open battery com-
partment cover on back of tool.
Remove battery terminal connector and
remove dead battery.
Replace battery being sure to correctly align
battery leads with battery polarity markings.
Replace battery compartment cover
Properly dispose of all used batteries.
1.
2.
3.
4.
5.
.