For technical questions, please call 1-800-444-3353.
Page 3
SKU 90693
Set Laser Level in slot.
Knob (14)
Lens Fixture (11)
On/Off Button (9)
Figure 1
Battery Cover (13)
Assembly/ Operation
Your Laser Level will require slight assembly prior to use. It is important that you read the entire
manual to become familiar with the product BEFORE you use the Laser Level. Before assembling
and operating the Laser Level be sure that you have all parts described in the Parts List and
Assembly Diagram located on the last pages of this manual.
1.
Set the Tripod on a flat surface. Set the Plastic Body (5) into the slot in the Tripod-see
Figure 1. Tighten down the Knob (14) on the top of the Tripod to secure the Plastic Body (5)
in place-see Figure 1.
2.
The Tripod Legs (15) can be raised or lowered by lifting the latch on the Tripod body (15) and
sliding the leg in or out to the desired height. Push the latch down into place to secure the
Leg into position. Repeat for the remaining two legs. Adjust the Tripod with Laser Level to
the desired height.
3.
The Tripod has a Tribrack type adjustment. Turn any of the two Adjusting Knobs (16)
closest to you toward each other to set the Laser Level beam to the desired X-axis. Keep
turning the Adjusting Knobs (16) until the Horizontal Bubble (4) floats exactly between the
black lines. If you are out of level, the bubble will float to the left or right side of the tube-
see Figure 2.
4.
Turn the front Adjusting Knob (16)
to move the Tripod up or down, setting the Y-axis.
5.
Once the Laser Level is set in the Tripod, you may set the laser to the type of beam you
wish to use. Set the Lens Fixture (11) “Down”; and this mode will fix the Laser Level beam
to a beam splitter (-) mode. Set the Lens Fixture (11) to the top mode and this mode will
set the Laser Level beam to a dot (.). Turn the Laser Level “ON” by pressing the “ON/OFF”
button (9), being careful not to point the Laser Level at anyone.
12.
Remove batteries if the Laser Level is not used for a long period of time.
Note: Old batteries can affect effectiveness/accuracy of product.
13.
This is a delicate instrument, do not drop or jar the Laser Level.
Warning:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
