CEN-TECH 66817, Руководство пользователя и инструкции по безопасности

Страница: 6 / 12

Page 6 For technical questions, please call 1-800-444-3353. Item 66817
installation
Read the EntiRE impORtant SaFEtY inFORmatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO pREVEnt SERiOuS inJuRY FROm aCCiDEntal OpERatiOn:
make sure that the power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
CautiOn! This Inverter must only be connected
to batteries with a output voltage of 12 volts DC.
Lower voltage will not operate the Inverter properly,
and more voltage could damage the Inverter
or the device being powered. Do not use this
Inverter with positive ground electrical systems.
the inverter is configured to have a number of
shut-down points, for the safety of the operator,
the unit, and the devices being used with it.
• If the DC input voltage drops too low, the
alarm on the Inverter will sound. Should the
input voltage drop further, the Inverter will
shut down automatically to prevent permanent
battery damage. Recharge the battery soon.
• If the DC input voltage exceeds 15V the
Inverter will shut down automatically.
• If the output load power rises higher
than the rating power of the Inverter; the
unit may shut down automatically.
• The Inverter may automatically shut down
if its internal temperature gets too high.
note: Even though this inverter has built-in
mechanisms to minimize damage, the above
situations should be avoided because they
can still damage the inverter or battery.
Functions
Cable
Power
Terminals
Ring
Terminals
Alligator Clips
Power Inverter
USB
Outlet
Figure 1
Power
Outlets
Power Button
Fault LED Power LED
Fan
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup