background image

Page 3

For technical questions, please call 1-800-444-3353.

Item 60657 

        

SAFETY

O

PERA

TION

M

AINTENANCE

SETUP

Safety Warnings and Precautions

General Safety Warnings

Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.   

Save all warnings and instructions for future reference.

WARNING! – RISK OF EXPLOSIVE GASES.

Working in vicinity of a lead-acid battery is 

dangerous. Batteries generate explosive gases 

during normal battery operation.  For this reason, 

it is of utmost importance that you follow the 

instructions each time you use the Power Pack.

To reduce risk of battery explosion, follow these 

instructions and those published by battery 

manufacturer and manufacturer of any equipment you 

intend to use in vicinity of battery. Review cautionary 

marking on these products and on engine.

Work Area Safety

1. 

Keep work area clean and well lit.  

Cluttered or dark areas invite accidents.

2. 

Do not operate Power Pack in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust.

  

The Power Pack 

can create sparks which may ignite the dust or fumes.

3. 

Keep children and bystanders away 

while operating the Power Pack.

  

Distractions can cause you to lose control.

4. 

Store idle equipment. Always lock up tools 

and keep out of reach of  children.

Electrical Safety

1. 

Do not drop a metal tool onto battery. It 

might spark or short-circuit battery or other 

electrical part that may cause explosion.

2. 

Do not operate if Power Pack has received a 

sharp blow, been dropped, or otherwise damaged 

in any way; take it to a qualified technician.

3. 

Do not leave

 

Power Pack unattended 

while switched on.

  

It could result 

in fire and property damage.

4. 

Do not expose to rain or wet conditions.  

Water entering the Power Pack will 

increase the risk of electric shock.

5. 

Do not use an extension cord with this item. 

6. 

Use of an attachment not recommended or 

sold by the manufacturer may result in a risk 

of fire, electric shock, or injury to persons.

7. 

To reduce risk of damage to electric plug 

and cord, pull by plug rather than cord 

when disconnecting the Adapter.

8. 

Do not operate with damaged cord or plug. 

Replace the cord or plug immediately.

Personal Safety

1. 

Wear ANSI-approved splash-resistant 

safety goggles and heavy-duty 

rubber work gloves whenever 

connecting, disconnecting, or 

working near battery.  Battery acid 

can cause permanent blindness.  

Avoid touching eyes while working near battery.

2. 

Do not use Power Pack while you are tired 

or under the influence of drugs, alcohol 

or medication. 

 

A moment of inattention 

while operating Power Pack may 

result in serious personal injury.

3. 

NEVER smoke or allow a spark or flame 

in vicinity of battery or engine.  

4. 

If battery acid contacts skin or clothing, 

wash immediately with soap and water. 

If acid enters eye, immediately flood eye with 

running cold water for at least 10 minutes 

and get medical attention immediately.

5. 

Remove personal metal items such as rings, 

bracelets, necklaces, and watches when working 

with a lead-acid battery.

 

A lead-acid battery can 

produce a short-circuit current high enough to weld 

a ring or the like to metal, causing a severe burn.

6.  People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.

Содержание 60657













Отзывы: