background image

Page 5

For technical questions, please call 1-888-866-5797.

Item 60322 

        

SAFET

y

Op

ERA

TION

M

AINTENAN

c

E

Sp

Ec

IFI

c

ATIONS

f.  When disconnecting charger, always do 

so in reverse sequence of connecting 

procedure and break first connection while 

as far away from battery as practical.

g.  A marine (boat) battery must be removed and 

charged on shore. To charge it on board requires 

equipment specially designed for marine use.

17. 

Wear ANSI-approved splash-resistant 

safety goggles and heavy-duty rubber 

work gloves whenever connecting, 

disconnecting, or working near battery.  

Battery acid can cause 

permanent blindness.

18. Maintain labels and nameplates on the charger.   

These carry important safety information.   

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

19. This product is not a toy.  

Keep it out of reach of children.

20. Unplug the Battery Charger from its 

electrical outlet before connecting its cables 

to a battery, or performing any inspection, 

maintenance, or cleaning procedures.

21. 

This charger does NOT have an automatic cut off.   

It is equipped with a timer.  check battery 

and time manually; do NOT depend 

solely on timer.  Leaving charger unattended 

can result in fire and property damage.

22. 

Use this charger with flooded lead-acid 

batteries only.

 When charging a maintenance-free 

battery, always monitor the progress of 

the charge by viewing the Charge Meter. 

Do not overcharge a maintenance-free battery.

23. Do not attempt to charge non-rechargeable 

or defective batteries.

24. Do not charge more than one battery at one time.

25. Have your charger serviced by a qualified repair 

person using only identical replacement parts.  

This will ensure that the safety of 

the charger is maintained.

26. Do not use charger while you are tired or under 

the influence of drugs, alcohol or medication.  

A moment of inattention while operating charger 

may result in serious personal injury.

27. Before moving charger, disconnect power supply 

and battery, then allow charger to cool.

28. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.  

In addition, people with pacemakers should: 

• Avoid operating alone. 

• Properly maintain and inspect to avoid 

electrical shock. 

• Properly ground power cord.  Ground Fault Circuit 

Interrupter (GFCI) should also be implemented 

– it prevents sustained electrical shock.

29. WARNING: The cord of this product contains 

lead, a chemical known to the State of California 

to cause cancer, and birth defects or other 

reproductive harm. Wash hands after handling.  

(California Health & Safety Code § 25249.5, 

et seq.

)

30. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by the 

operator that common sense and caution are 

factors which cannot be built into this product, 

but must be supplied by the operator.

 SAVE THESE INSTRUcTIONS.

Grounding and Ac power cord connection Instructions

Charger should be grounded to reduce risk of electric 

shock. Charger is equipped with an electric cord 

having an equipment-grounding conductor and a 

grounding plug. The plug must be plugged into an 

outlet that is properly installed and grounded in 

accordance with all local codes and ordinances.

DANGER

 – Never alter AC cord or plug provided 

– if it will not fit outlet, have proper outlet installed 

by a qualified electrician. Improper connection 

can result in a risk of an electric shock.

cAUTION – Risk of Fire or Electric Shock. 

Connect battery charger directly to grounding 

receptacle (three-prong). An adapter should 

not be used with battery charger.

Содержание 60322













Отзывы: