background image

7

4

FIG. 5

FIG. 4

FIG. 6

FIG. 3

FIG. 7

FIG. 8

FIG. 9

3.  WARNING

 

T

he

 

Tool

 

is

 

unsuiTable

 

for

 

conTinuous

 

use

 

and

 

should

 

be

 

allowed

 

To

 

cool

 

down

 

following

 

uninTerrupTed

successive

 

operaTions

for

 

insTance

having exhausTed a fully charged baTTery in one session

delay baTTery replacemenT for a few minuTes

.

     o

bserve

 

recommended

 

resT

 

periods

 

also

 

when

 

using

 

an

 

exTernal

 

power

 

supply

.

 

p

roTecT

 

The

 

Tool

 

from

 

rain

 

and

 

moisTure

. w

aTer

 

will

 

damage

 

The

  

Tool

 

and

 

baTTery

. e

lecTro

-

hydraulic

 

Tools

 

should

 

noT

 

be

 

operaTed

 

in

 

pouring

 

rain or under waTer

.

3.1) Using the battery charger

Carefully follow the instructions in the battery charger manual.

3.2) General information on how to use batteries

In order to use the batteries correctly, please follow these rules:

– Use the battery until the automatic residual energy display still has 1-2 LEDs showing:

this means the battery is almost completely discharged and no loss in the life of the 

battery has been caused.

– Be particularly careful when charging a new battery the first 2-3 times in order to be

certain of maximising the available energy level. 

– Allow the battery to cool down to ambient temperature prior to recharging.

– Rest the battery charger for at least 15 minutes between charges.

4. MAINTENANCE

The tool is robust, completely sealed, and requires very little daily maintenance. 

Compliance with the following points should help to maintain the optimum performance 

of the tool:

4.1) Thorough cleaning

Dust, sand and dirt are a danger for any hydraulic device.

Every day, after use, the tool must be wiped with a clean cloth taking care to remove any 

residual particles, especially around the moveable parts and the insulated flexible hose.

4.2) Replacement of the automatic coupler

To replace the automatic coupler of the hose or head, proceed as follows:

– Remove the old coupler.

– Carefully clean the thread to remove old sealant.

– Apply Teflon tape to the thread.

– Fit the new automatic coupler and tighten to 

30 Nm (22 lbf ft)

.

4.3) Insulated flexible hose

Operate the tool with the hose uncoiled. 

Do not bend, twist, kink, knot or squash the hose.

 Before operation, check the hose 

for any sign of damage.

When storing the tool in the canvas bag, coil the hose in large loops.

4.4) Storage

When not in use, the tool should be stored and transported in the canvas bag, to prevent 

damage. Canvas bag: type 

“009”

, size 390x390x130 mm, weight 0,6 kg.

copper 

bush

bolt

self-locking

nut

lug

washer

copper bush

Отзывы: