27
8. MAINTENANCE
Battery Pump
The pump is robust, completely sealed, and requires very little daily maintenance.
Compliance with the following points, should help to maintain its optimum performance:
8.1) Thorough cleaning of battery pump
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the pump and accessoires must be wiped with a clean cloth taking care to
remove any residue. Do not use Hydrocarbons to clean the rubber parts.
After use, protect the couplers of the pump, hose and hydraulic head with their
protective caps to prevent contamination.
8.2) Topping off the oil
(Ref. to Fig. 11)
Periodically check, at least every 6 months, the oil level in the pump and top off if necessary:
Position the pump without battery on its base on a flat surface.
Completely discharge the oil pressure by pushing the pressure release button (7).
Unscrew the filler cap (1).
By using a funnel,
top off very slowly
to completely fill the oil reservoir to the maximum level.
When the operation is finished replace the cap (1).
Always use clean recommended insulated oil, see section 1.
Do not use old or recycled oil. Do not use hydraulic brake fluid.
Ensure that used oil is disposed of in accordance with local regulations.
Cable cutting heads
The
Cembre
cable cutting heads are designed for on site use thanks to their robust construction
characteristics.
8.3) Thorough cleaning of cutting head
To guarantee the reliability of the
Cembre
cutting head it is recommended to:
After every use, remove dirt from the cutting head, cylinder, blades and seals using a brush
dipped in a liquid detergent. Dry the area carefully.
Carefully clean the quick couplers and their protective caps each time the unit is used.
Periodically, lubricate blade pivots with some drops of oil.
Содержание B68RC3
Страница 2: ...2 FIG 1 A H F C G E D B ...
Страница 5: ...5 TC085 KV RC3 TC120 KV RC3 9 4 FIG 8 FIG 10 FIG 7 8 Grounding wire TC096 KV RC3 FIG 9 8 8 8 ...
Страница 31: ...31 ...
