Cembre B600C, Руководство по эксплуатации и обслуживанию, Страница: 10 / 48

10
ENGLISH
4. DISPLAY
The OLED display (9) switches on automatically when the operating or pres-
sure release buttons are pressed, and off after 60 seconds of non-operation.
The display shows:
The main operational parameters of the tool processed by the circuit board,
such as peak pressure or force reached.
Information on the condition of the tool, such as the charge level, the
battery temperature and maintenance requirements.
Any operational or procedural ERRORS.
Use the touch button (8) to navigate through the menu screens to manage INFORMATION AND
SELECTION:
4.1) INFORMATION SCREENS:
display a pre determined parameter which will then appear each
time the tool is started and during the entire work cycle.
B600C
19AB623
F
m
= 67.4 kN
Fp = 49.5 kN
F
m
= 7.57 ton
Fp = 5.55 ton
1000
-14000
3
BATTERY
P
m
= 10762 psi
Pp = 7575 psi
P
m
= 742 bar
Pp = 522.3 bar
Fm: Minimum set force, expressed in kN.
Fp: Peak force reached, expressed in kN.
(screen as factory setting)
Fm: Minimum set force, expressed in USA sh. tons.
Fp: Peak force reached, expressed in USA sh. tons.
Pm: Minimum set pressure, expressed in bar.
Pp: Peak pressure reached, expressed in bar.
Pm: Minimum set pressure, expressed in psi.
Pp: Peak pressure reached, expressed in in psi.
Battery charge level.
No. of cycles performed.
No. of cycles before scheduled recommended maintenance.
Cembre
logo, tool model.
tool serial no.
8
9