11
4. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance. Compliance with
the following points, should help to maintain its optimum performance:
4.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any residue,
especially close to pivots and moveable parts.
Do not use hydrocarbons to clean the rubber parts.
4.2) Canvas bag
To protect the tool from accidental damage and dust, it should be stored with its accessories in
the special canvas bag provided and sealed well.
Canvas bag
type CVB-033
: Size 740x215x200 mm (29.1x8.5x7.9 inches), weight 1,7 kg (3.7 lbs).
4.3) Routine maintenance
When the tool reaches the predetermined number of hours worked, it will signal that routine
maintenance is recommended.
The tool will continue to work however, 15 sec. after use an alarm comprising 3 beeps
combined with illumination of the worklights will signal that its return to
Cembre
for
service is recommended (see section 6).
5. CONNECTION TO COMPUTER (Smartool thecnology)
The memory card integrated in the tool records operating data
for transfer via the USB cable supplied.
To view and manage this data, go to
www.cembre.com
and
register in the dedicated area, then download the free
Cembre
software
CEM_SWBT01
.
Keeping the Firmware of the tool updated, via free of charge
download from here, will optimise the tool’s performance.
B540NDK-BV
B540ND-BVA B540ND-BVE
USB port
USB port