CEMB TR-NC/8, Инструкция по эксплуатации и обслуживанию

Страница: 12 / 18

10
TR-NC/8 - R
ev
.02/2013
4.8 d
evIces for sensor InstallatIon
The no-contact sensors can be installed in tapped holes in the machine structure or in the bearing support. In some cases,
machines already have the necessary holes so that the transducers can simply be fitted and then adjusted to obtain the
exact air gap.
Otherwise the sensors can be installed on brackets or rigid supports.
In the latter case, be particularly careful to fasten the sensors as rigidly as possible in order to minimise vibrations due to
installation.
Example of fastening devices