Thank you for purchasing this product from CELSYS.
About CLIP STUDIO TABMATE
Press and hold the " (CLIP STUDIO)" button on the unit for three seconds or more to turn the power on and off.
Press the " (CLIP STUDIO)" normally to switch between modes (1 ‑ 4).
The pairing search starts automatically when the power is turned on.
See the TABMATE webpage below for details on connecting to your computer (pairing), button configurations, button
layout, operation instructions and compatibility with the latest operating systems.
This product also includes a serial number for CLIP STUDIO PAINT DEBUT.
To download this software, follow the instructions on the TABMATE webpage.
TABMATE webpage ：http://www.clipstudio.net/en/promotion/tabmate/
■Inquiries
Webpage：https://www2.celsys.co.jp/support/service̲en/service.html
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
・ Reorient or relocate the receiving antenna.
・ Increase the separation between the equipment and receiver.
・ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
・ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or
set the device to lower output power if such function is available.
Industry Canada statement
This device complies with ISEDʼ s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR dʼ ISED applicables aux appareils radio exempts de licence. Lʼ exploitation est autorisée aux deux
conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.
FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed)
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or
set the device to lower output power if such function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement
non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut
être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle
fonction est disponible.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
For Your Safety
⚠ WARNING
The following actions are prohibited. These actions may result in fire, electric shock or other accidents or injuries.
・ Do not scratch, modify, forcibly bend, twist or pull on this product.
・ Do not disassemble or customize this product.
・ Do not use this product for equipment on which people's lives directly depend, such as medical devices or precision devices; devices responsible
for people's safety; equipment where a malfunction could have a serious impact, such as critical computer systems; or other systems where a
high level of reliability is required.
・ Do not use this product in areas where the use of electronic devices or devices emitting radio waves is prohibited (hospitals, aircraft, etc.).
If any of the following situations occur, immediately stop using this product and remove the batteries. Otherwise, fire or electric shock may occur.
・ If smoke, abnormal heat, a burning smell or other abnormal phenomenona occur.
・ If water, other liquids (sweat, juice, etc.) or other foreign matter gets into the product.
・ If a lightning storm is nearby.
・ If this product is broken or subjected to impact such as dropping, bumping, etc.
Do not use, install or leave this product in the following places. Otherwise, fire or electric shock may occur.
・ Places with a lot of oil smoke or humidity, such as on a kitchen counter or next to a humidifier.
・ Near hot equipment, or in or near direct sunlight.
・ Places with a lot of moisture (near water, in a bathroom, outdoors in the rain or snow, etc.).
⚠ CAUTION
・ This product is a wireless device using the whole of the 2.4GHz band. Operations may be unstable if it is used near devices that produce a
magnetic field, static electricity or radio interference. Turn off the device or keep this product away from it.
・ A battery is included for the purpose of checking that this product works when using it for the first time. After confirming that this product
works, replace this battery with a commercial battery.
・ Remove and store the battery if this product will not be used for a long time.
●CELSYS, CLIP STUDIO and CLIP STUDIO PAINT are trademarks or registered trademarks of CELSYS, Inc. ●Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and other countries. ●Mac and macOS are trademarks or registered trademarks of Apple Computer, Inc. in the United States and other countries. ●
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. ●All other company names and product names described herein are trademarks or registered trademarks of their
respective holders. ●The specifications, price, design, etc. of this product may change without warning.
CLIP STUDIO
TABMATE
Instructions
CLIP STUDIO TABMATE(Model: CES-50006)
CELSYS, Inc.
https://www.celsys.co.jp/en/
© CELSYS,Inc.
Using a pen tablet has become
easier than ever! This wireless controller can be configured
with over 200 CLIP STUDIO PAINT features!
