OPERATING INSTRUCTIONS
Place the product in an upright position on a flat, steady, stable, heat-resistant surface. Make sure there is
nothing flammable or heat sensitive within 1 metre (40 inches). Operating the product in any other position
could cause a hazard.
Insert the plug into a suitable wall outlet after turning the thermostat knob counter-clockwise to the minimum
position and setting the power switch to “OFF” for OFF. The heater is suitable for operation on an A.C.
electricity supply having the same voltage as that show on it’s rating label.
Turn the power switch knob from “I” Minimum, “II” Medium, & “III” Maximum
Turn the thermostat knob clockwise to maximum position. When the temperature rises to a comfortable
level, slowly turn thermostat counter-clockwise until the power indicator light just goes out. To adjust the
room temperature turn the thermostat clockwise to raise the temperature, or counter-clockwise to lower it.
Thus the heater will automatically keep the room temperature at the desired level.
To turn off the heater, set the power switch to “0” position. The power indicator light turns off. Unplug the
product from the electrical outlet when it is left unattended or is not in use.
SAFETY CONTROL (TIP OVER SWITCH)
If the product falls over or is assembled upside down, the tip over switch will stop the heater working
automatically. When the heater is put back to the upright position, it will start working as normal again.
IMPORTANT! NEVER COVER THIS HEATER!
TECHNICAL SPECIFICATIONS
Model No: CELOH20M
Power Supply: 220-240V, 50Hz AC only
Power: 2400W
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.celsius.co.nz
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
