Celsius CELOH15T, Руководство по эксплуатации

Страница: 4 / 8

ASSEMBLY OF THE HEATER
Carefully turn the heater upside-down on a non-scratching and stable surface to prevent damage to
the paint finish or your floor surfacing (Figure 1).
Fit the wheel castors onto the heater by placing the U-shaped bolt between the outermost fin away
from the control side of the heater (Figure 2, 3).
Securely fasten the wheel castors to the heater by screwing the wing nuts onto the U-bolts (Figure 4).
Attach the second wheel castor at the bottom of the control panel, then securely fasten the wheel
castor onto the heater with the two screws (Figure 5).
IMPORTANT
: Please fit the wheel assemblies as per the diagram. Any other position may affect the
stability of the heater.
WARNING:
Only operate the heater in normal upright position with wheel assemblies attached to the
bottom, any other position could create a hazardous situation.
ASSEMBLY