OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
WARNING: THIS IS A DOUBLE SIDED HEATER. Keep all objects at least 1 metre from the
front, sides and rear of the appliance.
Note: When the heater is turned on for the first time, it may release a slight, odour or smoke.
This odour or smoke is a normal occurrence caused by the initial heating of the internal
heating elements and should not occur again.
HEAT CONTROL DIAL
The control switch positions are:
O - Power Off
I - Low Heat
II - High Heat
Check that the heat control switches are set to Off position before plugging the heater into
the mains supply. For greater economy, use the High Heat setting initially and then switch to
the Low Heat setting.
THERMOSTAT
Turn the thermostat knob clockwise until you reach the maximum temperature on the
graduated scale. When the desired room temperature is reached, slowly turn the knob anti-
clockwise until the heater turns off (you will hear a click). The heater will now cycle on and
off to maintain the set temperature.
CAUTION
The Micathermic Heater generates heat during use. Proper precautions must be taken to
prevent the risk of burns, scalds, fires or other damage to persons.
IMPORTANT! NEVER COVER THIS HEATER!
